Help

Welcome to the OpenSolver on-line help.

We hope that most of your questions will be answered on the Using OpenSolver page. However, if you still have a question, please post it below.

Building  Linear Programming models

Writing optimisation models that only use linear mathematical equations and inequalities is not easy. However, most of the time you want to build these “linear programming” models (and avoid non-linear models) because these are easier and more reliable to solve using packages such as OpenSolver. (OpenSolver uses CBC by default to solve these linear programmes.) Check out this Wiki page on linear programming.

The AIMMS folks have a great online chapter describing how to take non-linear requirements (local copy of pdf) and model them using linear programming. (Thanks to Stu Mitchell of PuLP fame for pointing out this resource.) The NEOS guide is also a great resource. If you still have a modelling question (e.g., how do I express this requirement using the rules for a linear program), please ask it on https://www.or-exchange.org/.

Common Software Problems

Excel can have problems dealing with add-ons. Visit http://www.add-ins.com/how_to_repair_office.htm for a guide on fixing these.

1. OpenSolver not loading – July 2016 Office update (no error message)

In July 2016, MicroSoft released an update to Office 365 which prevents OpenSolver from loading unless the .zip file is “unblocked” before the files are extracted. (We expect this change to appear in other versions of Excel.) The symptoms are simply that OpenSolver does not appear in the Data tab; there is no error message shown. To fix this, delete your old OpenSolver files (but not the downloaded .zip file), right click the downloaded OpenSolver .zip file, choose Properties, and click the Unblock button which will show if the file is blocked. Once the file is unblock, close the properties dialog, and then un-zip the files and open up OpenSolver.xlam as usual.

2. Unable to find the external solver …

If OpenSolver reports this problem, then it could not find a solver file that comes with OpenSolver. Please check that you have extracted (i.e. un-zipped or uncompressed) all the files from the OpenSolver download.

3. The solver did not create a solution file.

If this error is reported, then it is likely that OpenSolver was unable to run the solver executable. This may happen if the OpenSolver files  are in an ‘untrusted’ location, and so Windows will not let them be run. First check whether the solver is shown as found in the “About OpenSolver” form. If not, go to the folder identified in the “About OpenSolver” form and double click on this solver file. You should then see a command window open that gives the solver name and version information etc. If you don’t see this, then Windows should give you an error message to help you diagnose the problem. It may help to move the OpenSolver folder (and all the files it contains) into a location such as your Documents, or even into Program Files, and try again.

4. Solver crashes; OpenSolver reports no solution file

The files in the “Solver” folder provided with OpenSolver contain the actual solver code. These solvers are being continually upgraded as bugs are reported and fixed. If OpenSolver reports that no solution file was generated, then the solver may have crashed. This can happen on big problems when the solver runs out of memory, but also on smaller problems that happen to hit a solver bug. In such cases, you should check if a newer version of OpenSolver is available since we regularly update the solvers included with OpenSolver as they are released.

With CBC, a typical OpenSolver error for thois problem message might be: ‘The CBC solver did not complete, but aborted with the error code -1073741510’

If needed, you can download the latest version of CBC, Bonmin or Couenne from AMPL. Download the either the Windows or Mac version as appropriate. For Windows, get the 32-bit version if you have 32-bit Windows, or the 64-bit version otherwise. (The 64 bit version will solve much larger problems than the standard 32 bit version included in OpenSolver, so always choose this if possible. Right-clicking on Computer, and choosing Properties, will tell you if have a 32 or 64 bit system type.) Right click on the downloaded .zip file, choose Properties, and click the Unblock button if there is one. Then, open the .zip file, and drag the files into the right location in your OpenSolver Solvers folder (the win32, win64 or osx folder as appropriate), replacing the existing files. This may fix your problem.

Report a CBC bug

If after installing the latest version of CBC, CBC still crashes on you, then you may wish to report a bug. Please be sure to include the .lp file produced by OpenSolver; you can open this file using “View Last Model .lp File”. CBC bugs can be reported by either:

  1. The online CBC TRAC bug reporting system (which you will have to register for), or
  2. The CBC mail list

Switch from CBC to Gurobi
Since August 2014, OpenSolver has also supported solving models using the Gurobi solver. You can obtain a copy of this solver at no charge if you are at a university. Gurobi is faster and more stable than CBC, and comes highly recommended.

5. Repairing Excel

Sometimes it is useful (if all else fails) to repair your Office installation:

Windows

See these Microsoft Office 2010 and later instructions (or in Excel 2007, use Excel’s application menu, then Excel Options, then Resources, then “run Microsoft Office Diagnostics”). You might also want to look at http://support.microsoft.com/kb/166273, which talks about this.

Mac

Unfortunately there is no easy way to repair the Office 2011 installation. The best option is to follow these instructions to completely uninstall Office. You can then install Office again from scratch to get a clean version installed.

6. ‘Can’t find project or library’ : Missing Reference Errors

OpenSolver uses the “RefEdit” control, which we need but which can cause problems because of missing references caused by version changes. To check for missing references, using the VBA editor (which you access using Alt-F11), select OpenSolver (openSolver.xlam) in the Project window, choose Tools… References, and look for a “Missing:” line. If you see this, un-check that line, close the dialog, and choose File … Save OpenSolver.xlam to update the file. If this doesn’t help, try the above steps for repairing Excel.

7. Error 70: Unable to delete the file: C:\Users\XXXXXX\AppData\Local\Temp\log1.tmp

This errors happens if Excel crashes while OpenSolver is running, leaving log1.tmp open. Please restart your computer, which will close this file, and try again.

8. OpenSolver was working on my Mac. Then I updated to Excel 16.16.7 (released late 2018) and OpenSolver stopped working. What do I do?

We have had numerous users report this issue. We are looking for a Mac user with VBA experience to help us diagnose this problem. Please contact us at email hidden; JavaScript is required if you can help.

9. OpenSolver does not work in Excel installed from the Windows Store

Windows Store versions of Office applications do not support Add-ins such as OpenSolver; see this link, or this support page for another add-in, or this technical article from Add-in Express. This Dell article explains a little more. If you have a Windows Store version, it will display this in the Excel Version information, such as in the following example:

Version 1807 (Build 10325.20082 Microsoft Store)

The solution is to un-install Excel, and install the click-to-run versions, in which case the Excel version will change from ‘Microsoft Store’ to ‘Click-to-Run’. Standard installs (meaning not Office 365) don’t have this issue.

1,786 thoughts on “Help”

  1. Dear Sir,
    I’m try to download the Opensolver to my computer. however unable to install. I try several time. Would you please advise how to do the install method.
    Computer detail;
    OS Windows 10 professional
    Microsoft office 365

    Thanks and best regards.
    Chanchai Aksorndet

  2. Went to open the add-on, which I use almost daily, and got this error message tonight:

    “Add-on not available in G Suite Marketplace
    The developer of this add-on has not accepted the terms and conditions of G Suite Marketplace.”

    1. Please try again… we have ticked a few more boxes and published OpenSolver in the Google Marketplace. Andrew

  3. Hi. I want to use Nomad as my Solver Engine but the setup for Nomad was not included the zip file for the installation of Open Solver. I downloaded the setup separately and saved it in the Solver set up folder but I still cant use it

  4. How do I use VBA to write a script that can loop through a repetitive process to select constraints? I have 5700 constraints in my model and would like to save some time. Thanks.

  5. Hi,

    I am trying to build optimization model for Manpower planning of warehouse. It has two types of Manpower req. operator and labour. Warehouse activities for which Manpower needs to be planned are outbound, Inbound and inventory transfer. While day on day outbound numbers are fixed, inbound and inventory transfer are variables constrained by a monthly number which should be met. To solve this my objective function is coming in the format of “x*y” which I am not able to linearize. And, hence I am using non linear solver (Bonmin). Though it gives result in first run but if I run it again it shows error as “subscript out of range”. Any thoughts on why would it be happening and how to solve it?

Leave a Reply to RC Purnell Cancel reply

Your email address will not be published. Required fields are marked *